Overview
The server version of UBUNTU 16.04 LTS is installed.
References
Procedure
The steps are documented in Installing from CD .
Step 1: Download Software
The ISO image is downloaded from here .
Step 2: Boot the System off the ISO Image
For an example of how to do this under XEN, see the build diary for AUBURN .
Step 3: Select Language
The following screen will then appear. English is already selected:
Press Enter to continue.
Step 4: Boot Menu
The following screen will then appear. Install Ubuntu Server is already selected:
Press Enter to continue.
Step 5A: Select Language (Again)
The following screen will then appear. English is already selected:
Press Enter to continue.
Step 5B: Select Location
The following screen will then appear.
Select Australia .
Press Enter to continue.
Step 6: Select Keyboard Layout
The following screen will then appear.
Select No .
Press Enter to continue.
The following screen will then appear. English (US) is already selected:
Press Enter to continue.
The following screen will then appear. English (US) is already selected:
Press Enter to continue.
Step 7: Discover Hardware Configuration
The following screen will then appear.
Step 8: Set Host Name
The following screen will then appear.
Enter auburn (or a different host name).
Select Continue .
Press Enter to continue.
Step 9: Create New User
The following screen will then appear.
Enter douglas (or a different user).
Select Continue .
Press Enter to continue.
The following screen will then appear. douglas is copied from the previous screen.
Select Continue .
Press Enter to continue.
The following screen will then appear.
Enter the required password for douglas .
Select Continue .
Press Enter to continue.
The following screen will then appear.
Enter the same password again for douglas .
Select Continue .
Press Enter to continue.
Step 10: Encrypt Home Directory
The following screen will then appear.
Select No .
Press Enter to continue.
Step 11: Configure Clock
The following screen will then appear.
Select New South Wales .
Press Enter to continue.
Step 12: Partition Disk
The following screen will then appear. Since there is only one (1) disk drive, this is already selected:
Press Enter to continue.
The following screen will then appear.
Select Yes to overwrite whole disk.
Press Enter to continue.
The following screen will then appear.
Select Continue .
Press Enter to continue.
The following screen will then appear.
Select Yes to overwrite whole disk.
Press Enter to continue.
Step 13: Install Base System
The following screen will then appear.
Step 14: How To Update System
The following screen will then appear.
Leave proxy information blank.
Select Continue .
Press Enter to continue.
The following screen will then appear.
The following screen will then appear. No automatic updates is already selected:
Step 15: Install Additional Packages
The following screen will then appear. Standard system utilities is already selected:
Select OpenSSH Server .
Select Continue .
Press Enter to continue.
The following screen will then appear.
Press Enter to continue.
Step 16: Finish the Installation
The following screen will then appear.
Select Yes .
Press Enter to continue.
The following screen will then appear.
The following screen will then appear.
The following screen will then appear.
Select Continue .
Press Enter to continue.
Note: It is not necessary to remove the CD-ROM before the reboot because the default boot order is disk then CD-ROM (see Setting boot order for domUs ).