2014-04-26 Rebuild Victoria

Overview

VICTORIA suffered an I/O issue on disk #1 and became unbootable. I had to re-installed the OVS.

References

• Oracle® VM Installation and Upgrade Guide for Release 3.2
• 2 Installing Oracle VM Server on x86
• 2.2 Installing Oracle VM Server From a CD

Configuration Details

The disk configuration is set up as non-RAID. The following details are for future reference:

Disk #	Device Type	Serial #
0	ST1000NM001	Z1N0YC8F
1		Z1N0X3ZH

Procedure

I followed the procedure in 00 Install OVMS 3.2.6 with the following exceptions:

• Because of issues with the disk drives, the following partitions were set up:

/sda3 /boot
/sda2 swap
/sda1 /

• Partition /OVS was not added:
• eth1 was configured as the interface for managing the OVS because of the issue described in ETH0 has wrong MAC Address after Upgrade to OVMS 3.2.6